|
|
 |
All Mac Inc is an authorized Newer Spreader Dealer
(All Mac
Inc is only authorized to sell New Spreaders in the State of Minnesota)
|
|
 Why you need a Newer Spreader ® Manure disposal has become one of the more difficult problems for small horse farms. There is always the question
of where to put it. More often than not, it's put into piles for days, weeks and even longer. You can hire someone to
haul it away, but that is expensive and not always reliable. You can spread it by hand, but that's a back breaking job.
Invariably the pile just stays there creating odor and attracting flies, which are a nuisance and a health threat to your
horses. Then you have the additional problem of fly control. It has been shown that flies will travel several hundred feet
between your barn and the manure pile. The BEST remedy for all these problems is to disperse the manure immediately after
stall cleaning and to do it in a way that does not attract flies. If the manure is broken up into small pieces and spread
out on the pasture or lawn, it will decompose very quickly, especially on a hot, sunny day. Then it is no longer attractive
to flies. Plus, you receive the added benefit of providing a fertilizer and soil conditioner for your pasture. "Old time" manure spreaders
do not break up the manure adequately and with their many moving parts, they can require a great deal of maintenance. This
is too time consuming and laborious for today's small farm owner. Newer Spreader® offers a solution
to ALL of these problems, without creating new ones. The patented grinding drum crumbles the manure into small pieces and
spreads it evenly over the ground as it is pulled with a small garden tractor, four wheeler or golf cart. The Newer Spreader
® has few moving parts, and being made of aluminum, it has an extremely long life with virtually no maintenance.
|
|
|
Save Time!
No need to wheelbarrow the manure and spread it by hand anymore.
| Clean
your stalls directly into the Newer Spreader® , drive off to where you want to spread, kick in the engagement
levers to start the grinding drum, and begin driving and spreading. It takes a matter of minutes, spreads approximately 200
- 300 feet with a depth of 1/4 to 1/2 inch. What could be easier?You can also begin spreading those old manure piles, too. The Newer Spreader® is a new concept
in equine manure disposal. It was developed as a low cost alternative to traditional manure spreaders. AND it will save you
time with your daily chores! |
Maintenance: Maintenance consists of greasing axle bearings (zerk fittings
for your grease gun, no disassembly required) every six months and that's it. The aluminum construction of the Newer
Spreader ® and the solid rubber tires require no maintenance. What could be easier? |
Optimum Results: The
Newer Spreader® works great for spreading straight manure, manure with bedding such as sawdust, shavings
or pelleted bedding and composted manure and a small amount of uneaten hay mixed in with the bedding and manure. For optimum
results, do not spread straw bedding or large amounts of hay. |
Questions? Call us at (651) 295-9498
|
|
|
The Newer Spreader® Model 100 and Model 200 comes with a drop pin
type
hitch. An optional 2" ball hitch is available for an additional
charge of $18.00."
|
|
|
How To Use: Just fill the Newer Spreader® Model 100 or Model 200 with fresh manure and bedding from the stall or from
your compost pile or old manure pile and drive to where you want to spread the manure. There is an engagement
lever, one on each wheel. Just give them BOTH a gentle kick to engage them. Now the drum will turn with the wheels as
you drive. As the drum turns, the manure is passed out the bottom of the spreader, crumbled and dropped in a 3
foot wide path, about 1/4 to 1/2 inch thick. The Newer Spreader ® can discharge the manure-bedding going forward
or in reverse. In about 200-300 feet, it is emptied and you are finished! The crumbled manure will decompose very quickly.
|
|
|
Model 100 Specifications: - Lightweight, mill-finish
aluminum, 1/8" thick, 110 pounds.
- Balanced, fully or partially loaded.
- Smooth and quiet discharge of the manure and bedding.
- Empties the load in about
200 feet.
- Holds 8 cubic feet of material, approximately 3 - 5 stalls.
- Length - 6 ft. Long - 4 ft. wide - 2 feet high
- Weight - approx. 110 lbs.
Model 200 Specifications: - Lightweight, mill-finish aluminum, 1/8"
thick, 125 pounds.
- Balanced, fully or partially loaded.
- Smooth
and quiet discharge of the manure and
bedding. - Empties the load in about 300 feet.
Holds 13 cubic feet of material, which is approximately up to 8 stalls.
- Length - 6 ft.
- 4 ft. Wide - 31 inches in height
- Weight - approx. 125 lbs."
Prices
Original Model #100
$898
(Assembled)
Model #200
$1,144 (Assembled)
|
|
|
|
